Code : SBC

Brochure Apply Online

Latest News

Mechanical Engineering

Paper Publications

2019-20

INTERNATIONAL JOURNALS

1. J.B.Sajin, et al “Influence of fiber length on mechanical properties and microstructural analysis of jute fiber reinforced polymer composites” Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2020.07.623, 2020

2. J.B.Sajin, “Effect of Plural Spray Coating Process Parameters on Bonding Strength of Polyurea with Steel and Aluminum for Liquid Storage Applications” Journal of Testing and Evaluation (ASTM), 2020

3. J.B.Sajin, “Effect of Flame Retardant Additive with Polyurea for Explosive Environment” Materials Research Innovations, Taylor & Francis, 2019

4. J.B.Sajin, Effect of nanoparticle on emission and performance characteristics of biodiesel, International Journal of Ambient Energy, Taylor & Francis, 2019

5. J.B.Sajin, “Assessment of the emission characteristics of the diesel engine with nano-particle in neem biodiesel” Energy sources Part A: Recovery, Utilization and Environment Effects (Taylor & Francis ) https://doi.org/10.1080/15567036.2019.1612487, 2019

6. J.B.Sajin, “Emission behavior studies on the cause of ZnO nanoparticle inclusion in neat biodiesel” Energy sources, Part A: Recovery, Utilization, and Environment Effects (Taylor & Francis ), https://doi.org/10.1080/15567036.2019.1604909, 2019

7. J.B.Sajin, Emission Study on the effect of preheating the neat biodiesel on research diesel engine, International Journal of Ambient Energy (Taylor & Francis) https://doi.org/10.1080/01430750.2019.1594379, 2019

8. J.B.Sajin, Emission characteristics study of compression ignition engine fuelled with biodiesel and cerium oxide nanoparticles blends, International Journal of Ambient Energy, (Taylor & Francis) https://doi.org/10.1080/01430750.2019.1583132, 2019

9. J.B.Sajin, “Performance Study of Neat Biodiesel-Gas Fuelled Diesel Engine” International Journal of Ambient Energy, (Taylor & Francis) Print ISSN: 0143-0750 Online ISSN: 2162-8246, (https://doi.org/10.1080/01430750.2018.1542625), 2018

10. J.B.Sajin, “Emission study of alcohol – biodiesel blends propelled diesel engine” International Journal of Ambient Energy, Taylor & Francis (https://doi.org/10.1080/01430750.2018.1542629), 2018

11. J.B.Sajin, “Influence of water on exhaust emissions on unmodified diesel engine propelled with biodiesel” Energy sources, Part A:Recovery,utilization,and Environment Effects (Taylor & Francis) Print ISSN: 1556-7036 Online ISSN: 1556-7230 [Volume 40, 2018 – Issue 21 , Pages 2511-2517 , 2018.

12. J.B.Sajin, “Evaluation of emission, performance and combustion characteristics of dual fuelled research diesel engine” Environmental Technology (Taylor & Francis) https://doi.org/10.1080/09593330.2018.1509888, 2018

13. J.B.Sajin, “Performance and Emission Study on the effect of oxygenated additive in neat Biodiesel fuelled diesel Engine” Energy sources, Part A:Recovery,Utilization,and Environment Effects (Taylor & Francis ) [Volume 41, 2018 – Issue 16 , Pages 2017-2027, 2018

14. J.B.Sajin, “Deformation Studies in Natural Plant Fiber Composites Using Finite Element Analysis” International Journal of Engineering Computational Research and Technology, ISSN (Online): 2456-9852, Volume 3, Issue 1, pp. 54-57, 2018

2017-18

INTERNATIONAL JOURNALS

 

  1. Sreejith Mohan, Control of exposure to Hexavalent chromium concentration in shielded metal arc welding fumes by nano-coating of electrodes, International journal of Occupational and Environmental Health, 2018 (DoI: 10.1080/10773525.2018.1436014.

 

  1. Sreejith Mohan, Investigation on the Influence of Nano Structured Zirconia Coating on the Corrosion Inhibition of SS 304 Stainless Steel, Advanced Manufacturing and Materials Science, (DoI: 10.1007/978-3-319-76276-0_20)

 

  1. S. Senthil Saravanan, Mechanical behavior of carbon nanotubes reinforced AA 4032 bimodal alloys, Materials Today, Volume 5, Issue 2, Part 2, 2018, Pages 6717-6721.

 

  1. Kiran Sankar M.S, Design and Fabrication of hybrid aluminium composite for automobile connecting rod, Advanced Manufacturing and Materials Science, 2018 .

 

  1. B.Sajin, Finite element Analysis for deformation studies in natural fiber (Human hair) composites, International Journal of Applied Engineering Research (IJAER), ISSN 0973-4562 Volume 13, Number 9, 2018, pp. 6894-6897.

 

  1. B.Sajin, Influence of water on exhaust emissions on unmodified diesel engine propelled with biodiesel, Energy sources, Part A:Recovery,utilization,and Environment Effects ISSN: 1556-7036 (In Press)

 

  1. B. Sajin , Finite Element Analysis for Deformation Studies in Natural Fiber (Human Hair) Composites, International Journal of Applied Engineering Research, ISSN 0973-4562 Volume 13, Number 9, 2018, pp. 6894-6897.

 

  1. J B.Sajin, Evaluation of emission, performance and combustion characteristics of dual fuelled research diesel engine, Environmental Technology, 2018, Print ISSN: 0959-3330 Online ISSN: 1479-487X.

 

  1. S. Senthil Saravanan, Sreejith Mohan, J. B. Sajin, “Synthesis of metal catalyst carbon nanotubes by arc-discharge method used for energy efficient applications”, 2018, American Institute of Physics (In Press)

 

  1. Trijo Tharayil, Effect of nanoparticle coating on the performance of a miniature loop heat pipe for electronics cooling applications. Journal of Heat Transfer 140 (2), 2017 022401-09.

 

  1. Trijo Tharayil, Thermal Management of Electronic Devices with Combined Effects of Nanoparticle Coating and Graphene-Water Nanofluid Using Miniature Loop Heat Pipe. Transactions on Components, Packaging and Manufacturing Technology,

 

NATIONAL/ INTERNATIONAL CONFERENCES

  1. Sreejith Mohan, Corrosion Protection of AISI 304 Stainless Steel by Multi-Layered Nano ZrO2-TiO2 Composite Coatings, Global Nano Technological Congress and Expo, April 14-18, 2018, Dubai.

 

  1. Sreekumar E.N, National Conference on “Recent Advances in Mechanical Engineering” RAME2018. Sree Buddha College of Engineering, Alappuzha, Kerala, 17-18th April 2018.

 

  1. Vaisakh P S, Review on jack fruit dressing Machine, National Conference on “Recent Advances in Mechanical Engineering” RAME2018. Sree Buddha College of Engineering, Alappuzha, Kerala, 17-18th April 2018.

 

  1. Vidya V, Physeco chemical characterization of cross linked polyethylene in total knee replacement, National Conference on “Recent Advances in Mechanical Engineering” RAME2018. Sree Buddha College of Engineering, Alappuzha, Kerala, 17-18th April 2018.

 

  1. Vaisakh P.S, Domestic coconut oil extraction machine, National Conference on “Recent Advances in Mechanical Engineering” RAME2018. Sree Buddha College of Engineering, Alappuzha, Kerala, 17-18th April 2018.

 

  1. Sreejith Mohan, Investigation on the influence of Nano-structured Zirconia on the corrosion inhibition of SS 304 stainless steel, International conference on Advanced Manufacturing and Material Science, Muthoot Institute of Technology, 15-16 Jan. 2018.

 

  1. Sreejith Mohan, Corrosion protection of AISI 304 stainless steel by multilayer Nano ZrO2-TiO2 composite coatings, Kerala Technological Congress (KETCON), APJ Abdul Kalam Technological University and Kerala State Council for Science Technology and Environment, 23-25 Feb 2018.

 

  1. S. Senthil Saravanan, J.B.Sajin, Sreejith Mohan, Synthesis of metal catalyst carbon nanotubes by arc-discharge method used for energy efficient applications, International Conference on Sustainable Engineering & Technology (IConSET-2018), ACS College of Engineering, Bengaluru, April 2018.

 

  1. Kiran Sankar M.S, Design and Fabrication of hybrid aluminium composite for automobile connecting rod, International conference on Advanced Manufacturing and Material Science, Muthoot Institute of Technology, 15-16 Jan. 2018.

 

  1. Sreekumar E.N, Study on Tribological and surface repairing performances of hybrid Nanolubricants on Al alloy, Kerala Technological Congress (KETCON), APJ Abdul Kalam Technological University and Kerala State Council for Science Technology and Environment, 23-25 Feb 2018.

 

  1. J B.Sajin, M.S.Senthil Saravanan, Sreejith Mohan, Synthesis and mechanical properties evaluation of nano alumina nano rice husk fiber reinforced polymer matrix composites, ICITEST2K-18, Rajas Engineering College, 23rd March 2018.

 

  1. J B.Sajin, M.S.Senthil Saravanan, Sreejith Mohan, Vaisakh Y, Ratheesh R, Experimental Investigations on Mechanical Properties of Jute Mat Fiber Reinforced Composites with Polyester Resin Matrices, ICAIET-18, Rohini College of Engineering&Technology, 28th March 2018.

 

  1. J B. Sajin, Mechanisms of Thermal Decomposition of Jute Fiber Reinforced Composites, National Conference on Engineering Applications, Universal Engineering College, 16th March 2018.

 

  1. Sreejith Mohan, Influence of Nano Structured ZrO2-TiO2 Composite on the Corrosion Inhibition of AISI 304 Austenitic Stainless Steel, National Conference on Ecofriendly Technological Innovations for Sustainable Development, Sree Buddha College of Engineering, Pattoor, Alappuzha, 6-7 April, 2017.

 

  1. Trijo Tharayil, Renjith Raj R., Gokul O., Aswin Mohan, Thermal performance of a miniature loop heat pipe at different filling ratios using distilled water. National Conference on “Recent Advances in Mechanical Engineering” RAME2018. Sree Buddha College of Engineering, Alappuzha, Kerala, 17-18th April 2018.

 

  1. Trijo Tharayil, B. Sajin, Renjith Raj R., Gokul O., Aswin Mohan, Effect of graphene-water nanofluid on the thermal performance miniature loop heat pipe. National Conference on “Recent Advances in Mechanical Engineering” RAME2018. Sree Buddha College of Engineering, Alappuzha, Kerala, 17-18th April 2018.

 

  1. Trijo Tharayil, Heat Transfer Performance of Nano Coated Miniature Loop Heat Pipe with Graphene-Water Nanofluid. National Conference on “Innovations in Mechanical Engineering” NCIME ’17. Karunya University, Coimbatore, 20th April 2017.

 

  1. Trijo Tharayil, Effect of Nanoparticle Coating at Evaporator on the Thermal Performance of Miniature Loop Heat Pipe. National Conference on “Innovations in Mechanical Engineering” NCIME ’17, Karunya University, Coimbatore, 20th April 2017.

 

  1. Gokul .O, Effect of grapheme –water nanofluid on the thermal performance miniature loop heat pipe, National Conference on “Recent Advances in Mechanical Engineering” RAME2018. Sree Buddha College of Engineering, Alappuzha, Kerala, 17-18th April 2018.

 

  1. Gokul .O, Thermal performance of a miniature loop heat pipe at different filling ratio using distilled water, National Conference on “Recent Advances in Mechanical Engineering” RAME2018. Sree Buddha College of Engineering, Alappuzha, Kerala, 17-18th April 2018.

 

  1. Jinan .S, Nano structured Tio2 Coating for the corrosion inhibition of stainless steel, National Conference on “Recent Advances in Mechanical Engineering” RAME2018. Sree Buddha College of Engineering, Alappuzha, Kerala, 17-18th April 2018.

 

  1. Amjith T R, Design and development of wind powered and water purification system” RAME2018. Sree Buddha College of Engineering, Alappuzha, Kerala, 17-18th April 2018.

 

  1. Vaisakh Y, Investigation on the influence of Nano-structured Zirconia on the corrosion inhibition of SS 304 stainless steel” SCI Indexed Springer nature as proccedings of International conference on Advanced Manufacturing and Material Science, International conference on Advanced Manufacturing and Material Science, January 2018

 

  1. Mr Vaisakh Y, Experimental Investigations on Mechanical Properties of Jute Mat Fiber Reinforced Composites with Polyester Resin Matrices, ICAIET-18, Rohini College of Engineering&Technology, Kanyakumari

 

  1. Akhil KV, Design and development of wind powered and water purification system, National Conference on “Recent Advances in Mechanical Engineering” RAME2018. Sree Buddha College of Engineering, Alappuzha, Kerala, 17-18th April 2018

 

 

2016-17

INTERNATIONAL JOURNALS

 

  1. Vijeesh, Corrosion behaviour of austempered ductile iron (ADI) in iron ore slurry. International journal of Engineering Science and Technology, Vol.8, No.3, 2016, pp. 7-12.

 

  1. Vijeesh, The effect of chilling & Ce Addition on the micro structure and mechanical properties of Al – 23Si Alloy, J. of Materials Engineering & Performance, Vol. 26 (1), 2016, pp. 343-349.

 

  1. Sreejith Mohan, Modeling of Fume Formation from Shielded Metal Arc Welding Process, Metallurgical and Materials Transactions B, 48, 2017, 1268-1278.

 

  1. Vijeesh, The effect of Strontium modification on T6 heat treatment parameters, micro structure and hardness of Aluminium Silicon – A356 alloy, Journal of Material and Metallurgical Engineering, 2016.

 

  1. Amjith T.R, Forming Limit Diagram Generation of Aluminium Alloy AA2014 Using Nakazima Test Simulation TOOL, Procedia Technology, Vol 24, 2016, pp386-393.

 

INTERNATIONAL CONFERENCES

  1. Vijeesh, Effect of strontium modification on T6 Heat treatment parameters, Micro structure & Hardness of Aluminium Silicon A356Alloy, Proceedings of national conference on futuristic advancements in ME (FAME-2K16), Aug 8-9, 2016, CAPE, Thalassery.

  • Approved by AICTE , New Delhi

  • Affiliated to Kerala University

  • Kerala Technological University

  • ISO 9001-2008 Certified Institution

    • Professional Body Chapters & Clubs