Paper Publications
PUBLICATION/CONFERENCE DETAILS
1. Amjith S, Ananthu Vijayakumar, “An Induction Generator Based Hybrid Power Generation System For Aircraft”, Engineering Education for Facing the Future 2018 (E2F2 2018) National Conference on Emerging Trends in Green Electrical Technologies (NCEGET’18), April 2018.
2. Amjith S, Ananthu Vijayakumar, “An Induction Generator Based Hybrid Power Generation System For Aircraft,” National Conference on Future Technologies in Power, Control & Communication Systems (NFTPCOS) 2018, March 2018 (Accepted for publication).
3. Amjith S, Ananthu Vijayakumar, “An Induction Generator Based Hybrid Power Generation System For Aircraft,” National Conference on Emerging Technologies (NACET 2018), March 2018.
4. Amritha Anand, Nandan G “A Novel Method of Energy Regeneration in Electric Vehicle” A Novel Method of Energy Regeneration in Electric Vehicle”, National Conference on Future Technologies in Power control and communications (NFTPCOS-18), College of Engineering Perumon, vol.1 March 2018 (Accepted in the International Journal of Innovative Research in Electrical Electronics and Communication Engineering Vol.1, Special issue march-2018).
5. Amritha Anand, Nandan .G, Sooraj .O. S, “Effective utilization of regenerative braking in electric vehicle 2018”, Kerala Technological Conference (KETCON) National Conference Proceedings, February -2018, ISBN Number: 978-93-5300-630-3.
6. Amritha Anand, Nandan .G, “An Energy Efficient Regenerative Braking System”, IEEE International Multi-conference on Computing, Communication, Electrical and Nano Technology, Mangalam College of Engineering, Ettumanoor, April -2018 (Accepted for publication).
7. Amritha Anand, Nandan .G, “A Bi-directional Buck-Boost Converter for Energy Efficient Regenerative Braking System”, Annual conference series on Engineering education for facing the future, Sree Buddha College of Engineering, April 2018.
8. Anagha Basheer, Sindhu V, “Reduction of Torque Ripples in Three- Phase Four Switch Inverter -Fed PMSM Drives using Space Vector Pulse width Modulation”, National conference on Kerala Technological Conference (KETCON’18) at Sahrdaya College of Engineering and Technology, Thrissur, on February 23, 2018.
9. Anagha Basheer, Sindhu V, “Reduction of Torque Ripples in Three- Phase Four Switch Inverter -Fed PMSM Drives using Sliding Mode Controller”, National conference on future technologies in power control & communication systems (NFTPCOS’18) at College of Engineering, Perumon, on March 17, 2018.
10. Anagha Basheer, Sindhu V, “A Novel Approach for Reduction of Torque Ripples in Three- Phase Four Switch Inverter -Fed PMSM Drives using Sliding Mode Controller”, National conference on emerging trends in green electrical technologies (NCEGET’18) at Sree Buddha College of Engineering, Pattoor, on April 17, 2018.
11. Bijimol P S, Sheleel F, R Reshma, “A proportional resonant controller based torque ripple reduction in PMSM”, Kerala technological congress (KETCON-2018 Human computer interface), Sahrdaya College of Engineering and Technology, Thrissur February 2018.
12. Bijimol P S, Sheleel F, Anagha Basheer, “Minimisation of torque ripple in PMSM using a proportional resonant control technique”, National Conference on Future Technologies in Power, Control and Communication Systems (NFTPCOS-18), Perumon College of Engineering, March 2018.
13. Bijimol P S, Sheleel F, “Reduction of Torque Ripples in PMSM Using a Proportional Resonant Controller Based Field Oriented Control”, International Conference on Circuits, Power and Computing Technologies (ICSCS 2018), Baselios Mathews II , Sasthamkotta, April 2018.
14. Bijimol P S, Sheleel F, “Torque Ripple Mitigation in PMSM Using A Proportional Resonant Controller Based Field Oriented Control”, National Conference on Emerging Trends in Green Electrical Technologies (NCETGET’18), Sree Buddha College of Engineering, April 2018.
15. Dhanusha T, Gayathri Vijayachandran, “ Model predictive torque control of induction motor”, Kerala Technological Congress (KETCON-2018 Human Computer Interface), at Sahridaya College of Engineering, Thrissur, Feb, 2018.
16. Dhanusha T, Gayathri Vijayachandran, “ Reduction of Torque Ripples in Induction Motor Using Model Predictive Torque Control Method”, National Conference on Future Technologies in Power Control and Communication Systems NFTPCOS-18, at College of Engineering, Perumon, Kollam, March,2018.
17. Dhanusha T, Gayathri Vijayachandran, “ An efficient torque ripple reduction in induction motor using model predictive control”, International Conference on Soft Computing Systems (ICSCS 2018), at Baselious Mathews II, Shasthamkotta, April, 2018.
18. Dhanusha T, Gayathri Vijayachandran, “ Induction Motor control using Model Predictive Torque Control”, National Conference on Emerging Trends in Green Electrical Technologies(E2F2), at Sree Buddha College of Engineering, Pattoor, April, 2018.
19. Gopika Vijayan, Vinod V P, Sreejith T “An Efficient, Stand-Alone, Battery Less Photovoltaic Water Pumping System”, Kerala Technical national Conference, Feb 2018 at Sahridaya College of Engineering, Feb 2018.
20. Gopika Vijayan, Vinod V P, “Four Switch Three-Phase Inverter Fed Induction Motor for Economical and Efficient Stand Alone Solar Water Pump”, IEEE Conf. on Control, Power, Communication and Computing Technologies, March 2018 at Vimal Jyothi College of Engineering, Kannur, March 2018. (Accepted for publication).
21. Gopika Vijayan, Vinod V P, Sreejith T, “Stand-Alone, Cost Effective Photovoltaic Water Pumping System”, Int. Journ. of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering at College of Engineering, Perumon, March 2018.
22. Gopika Vijayan, Vinod V P, Sreejith T, “A Comparative Analysis on Three Phase Six Switch Inverter and Three Phase Four Switch Inverter Fed Induction Motor”, Inter. Conf. on Soft Computing System at Baselious Mathews II College of Engineering, Kollam, (Accepted for publication) April 2018.
23. Gopika Vijayan, Vinod V P, Sreejith T, “A Review on Implementation of a High-Efficiency, High Lifetime, and Low-Cost Converter for an Autonomous Photovoltaic Water Pumping System”, Nat. Conf. on Emerging Trend in Green electrical Technology at Sree Buddha College of Engineering, Pattoor. April 2018
24. Jisha Anna Mathew, Juna John Daniel, “Perturb and Observe Control for Solar Photovoltaic Array Powered Zeta Converter Fed SRM Drive for Pump Application.” National Conference on Recent Innovations in Science, Engineering and Technology, Institute of Research and Journals, February 2018 (Accepted for publication).
25. Jisha Anna Mathew, Juna John Daniel, Najma Habeeb, “Switched reluctance Motor drive Water Pumping System Using Zeta Converter Powered by PV Array”, National Conference on Future Technologies in Power, Control and Communication Systems, March 2018 (Accepted for publication).
26. Jisha Anna Mathew, Juna John Daniel, “Zeta Converter Fed Switched Reluctance Motor Drive PV Array for Pumping Application”, International Conference on Circuits, Power and Computing Technologies, April 2018 (Accepted for publication).
27. Jisha Anna Mathew, Juna John Daniel, “Control of Solar Driven Switched Reluctance Motor Using Zeta Converter in Water Pumping System”, National Conference on Emerging Trends in Green Electrical Technology, April 2018.
28. Kavya Suresh, Nandan G, “A Novel Method for Power Quality Improvement of SRM Drive Fed Three-Phase Three-Wire DG System”, International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering (IJIREEICE), 2018, Vol. 1, Special Issue 2, ISSN 2321-2004.
29. Kavya Suresh, Nandan G, “Shunt Active Filter for Power Quality Improvement of SRM Drive fed DG System”, International Conference at Baselios Mathews II College of Engineering (BMC), Sasthamcotta, on April 19, 2018.
30. Kavya Suresh, Nandan G, “Power Quality Improvement of SRM Drive fed Distributed Generation System”, National conference on Kerala Technological Conference (KETCON’18) at Sahrdaya College of Engineering and Technology, Thrissur, on February 24, 2018, sl. No. XIII.4, ISBN Number: 978-935300-630-3.
31. Kavya Suresh, Nandan G, “Solar Photovoltaic Powered Grid Connected Inverter”, National conference on emerging trends in green electrical technologies (NCEGET’18) at Sree Buddha College of Engineering, Pattoor, on April 17, 2018.
32. Meera Murali, Sreekanth P. K, “A novel method for the torque and current ripple minimization of BLDC motor.” IEEE International Conference on Control, Power, Communication and Computing Technologies, Vimal Jyothi Engineering College, Kannur, March 2018.
33. Meera Murali, Sreekanth P. K, “A new approach for the current and torque ripple minimization of BLDC motor using phase voltage method”, National Conference on Future Technologies in Power, Control and Communication Systems, Perumon College of Engineering, March 2018.
34. Meera Murali, Sreekanth P. K, “The torque and current ripple minimization of BLDC motor using novel phase voltage method for high speed applications”, International Conference on Circuits, Power and Computing Technologies, Baselios Mathews II , Sasthamkotta April 2018.
35. Meera Murali, Sreekanth P. K, “Phase voltage control for an efficient operation of BLDC motor”, National Conference on Emerging Trends in Green Electrical Technologies, Sree Buddha College of Engineering, April 2018.
36. Meera Murali, Megha S. Pillai, “Analysis and control of commutation errors in sensorless drive of BLDC based on compensation technique”, National Conference on Future Technologies in Power, Control and Communication Systems, Perumon College of Engineering, March 2018.
37. Megha S Pillai, Vijina K, “Efficient torque and commutation ripple minimization in a BLDC Motor for industrial applications”, (KETCON-2018 Human Computer Interface), at Sahridaya College of Engineering, Thrissur, Feb, 2018.
38. Megha S Pillai, Vijina K, “ Analysis and Control of Commutation Errors in Sensorless Drive of BLDC based on Compensation Techniques”, National Conference on Future Technologies in Power Control and Communication Systems (NFTPCOS-18), at College of Engineering, Perumon, Kollam, Mar, 2018.
39. Megha S Pillai, Vijina K, “ A Novel Self Correction Torque and Commutation Ripples Reduction in BLDC Motor”, International Conference on Soft Computing Systems (ICSCS 2018), at Baselious Mathews II, Shasthamkotta, April, 2018.
40. Megha S Pillai, Vijina K, “ Design and Control of a Hoist System in a BLDC using Compensation Technique”, National Conference on Emerging Trends in Green Electrical Technologies(E2F2), at Sree Buddha College of Engineering, Pattoor, April, 2018.
41. Megha S Pillai, Vijina K, “Efficient Commutation and Torque ripples minimization in BLDC motor for Hoist applications”, IEEE International Conference on Control, Power, Communication and Computing Technologies (ICCPCCT), at Vimal Jyothi Engineering College, Kannur, March, 2018.
42. Najma Habeeb, Juna John Daniel,”Bridgeless Canonical Switching Cell (BL-CSC) Converter fed SRM Drive for Enhancing the Power Factor Correction”, International Conference on Soft Computing Systems (ICSCS 2018), Kollam, 19th & 20thApril,2018 (Accepted for Publication).
43. Najma Habeeb, BibinThankachan, “Power Factor Improvement of an Induction Motor”, International Conference on Engineering and Technology Social Science & Humanities (ECBA 2017), Rydges on Swanton Street, Melbourne, VIC 3000 Australia, July 08-09, 2017.
44. Najma Habeeb, Juna John Daniel, “Canonical Switching Cell Converter fed SRM Drive for Enhancing the PF Correction”, Kerala Technological Conference (KETCON 2018), Sahridaya College of Engineering, Thrissur, 23-24 March, 2018 (Accepted for Publication).
45. Najma Habeeb, Juna John Daniel, “Performance Evaluation of Bridgeless Canonical Switching Cell (BL-CSC) Converter fed SRM Drive for Power Factor Improvement”, National Conference on Emerging Trends in Green Electrical Technologies (E2F2 2018), Sree Buddha College of Engineering, April 06-07,2018.
46. Najma Habeeb, Juna John Daniel, “Power Quality Improvement in Bridgeless Canonical Switching Cell (BL-CSC) Converter fed SRM Drive”, National Conference on Future Technologies in Power, Control & Communication System (NFTPCOS-2018), Kollam, March 16-17, 2018 (Accepted for Publication).
47. Renjith V R, Ananthu Vijayakumar, “Modelling and Optimization of Synchronous Homopolar Machine”, IEEE International Multi- Conference on Computing, Communication, Electrical and Nanotechnology, April 2018 (Accepted for publication).
48. Renjith V R, Ananthu Vijayakumar, “Modelling and Optimization of Synchronous Homopolar Machine”, KETCON, February 2018 (Accepted for publication).
49. R Reshma, Vishnu J, Bijimol P S, “Deadbeat Predictive Current Control of Permanent Magnet Synchronous Motor for Electric Vehicle”, Kerala Technological Congress (KETCON-2018 Human Computer Interface), at Sahridaya College of Engineering, Thrissur, Feb, 2018.
50. R Reshma, Vishnu J, Bijimol P S, “ Electric Vehicle Control using PMSM”, National Conference on Future Technologies in Power Control and Communication Systems NFTPCOS-18, at College of Engineering, Perumon, Kollam, Mar, 2018.
51. R Reshma, Vishnu J, “ Control of PMSM by Deadbeat Predictive Current Control”, International Conference on Soft Computing Systems (ICSCS 2018), at Baselious Mathews II, Shasthamkotta, April, 2018.
52. R Reshma, Vishnu J, “Permanent Magnet Synchronous Motor using Deadbeat Predictive Current Control”, National Conference on Emerging Trends in Green Electrical Technologies (E2F2), at Sree Buddha College of Engineering, Pattoor, April, 2018.
53. Riya Anna Thomas and Reema N, “Simulation and Analysis of Control Algorithms for an Open End Winding Induction Motor”, National conference on Recent Innovations in Science, Engineering and Technology, Institute of Research and Journals, Feb 2018 (Accepted for publication).
54. Riya Anna Thomas and Reema N, “Solar Powered Dual Inverter Fed Induction Motor with Open End Windings and its Control Algorithms for Pumping Applications,” National Conference on Future Technologies in Power, Control and Communication Systems, March 2018 (Accepted for publication).
55. Riya Anna Thomas and Reema N, “Modified Dickson Charge Pump and Control Algorithms for a Solar Powered Induction Motor with Open End Windings,” International Conference on Circuits, Power and Computing Technologies, April 2018 (Accepted for publication in Springer).
56. Riya Anna Thomas and Reema N,” Simulation and Comparison of Solar Powered Conventional Induction Motor with Open End Winding Induction Motor,” National Conference on Emerging Trends in Green Electrical Technologies, Department of EEE, Sree Buddha College of Engineering, April 2018.
57. Sooraj O. S, Mithun M.S, “Estimating Moisture in Transformer Oil, Utilizing A HV De-Emulsification Process”, National Conference on Emerging Trends in Green Eleltrical Technologies (NCGET’ 18), 18th April 2018.
58. Surya S Kumar and Reema N, “Fault protection and diagnosis of doubly fed induction generator based wind turbine”, Kerala Technological Conference (KETCON’18), Feb 2018.
59. Surya S Kumar and Reema N “Rotor side and grid side converter faults analysis of DFIG based wind turbine”, in National Conference on Future Technologies in Power, Control and Communication Systems, March 2018 (Accepted for publication).
60. Surya S Kumar and Reema N “Fault Analysis of DFIG Based Wind Turbine” in National conference on emerging trends in green electrical technologies (NCEGET’18), April 2018.
61. Surya S Kumar and Reema N, “Analysis of Switching Faults in DFIG Based Wind Turbine” in International conference on soft computing systems (ICSCS-2018), April 2018 (Accepted for publication in Springer).
62. Vishnu P V and Vishnu J, “Hybrid System for Sustainable Grid Voltage in Low Power Application”, National Conference on Future Technologies in Power, Control and Communication Systems, March 2018 (Accepted for publication).
63. Vishnu P V and Vishnu J “Photovoltaic –Synchronous Generator Hybrid Micro Grid System for Small Scale Application”, National conference on emerging technologies (NACET2K18), March 2018.
64. Sreejith T, Vishnu J, Gopika Vijayan, “DC MOTOR CONTROLLED NOVEL, COST EFFECTIVE ELECTRIC WHEELCHAIR”, Kerala Technological Conference, Feb 2018 at Sahridaya College of Engineering, Thrissur.
65. Sreejith T, Vishnu J, Gopika Vijayan, “TRACKBALL CONTROLLED NOVEL, COST EFFECTIVE ELECTRIC WHEELCHAIR”, IEEE Conf. on Control, Power, Communication and Computing Technologies, March 2018 at Vimal JyothiCollege of Engineering, Kannur (Accepted for Publication).
